March 13, 2016
SM5-WP Kit
March 13, 2016
Show all

SM5-TR Kit

High performance, Omni-directional, pre-amplified microphone for fixed location security applications where
vandalism is of concern. Electret element is mounted in a special housing which is
out of reach to objects inserted into the sound holes. 25’ pickup pattern in all directions. Built in limiter circuit
automatically lowers the output level during loud sound intervals. Hi cut and
low cut filters significantly reduce background noise. Stainless steel plate
mounts flush or on a single gang electrical box.
Connects directly to our switcher / mixer /amplifiers or use one of our many
interface products to make fast and clean connections to DVRs or remote
monitoring equipment.



  • SM1-TR flush mount microphone.
  • Mounting screws.
  • Warning label.
  • Installation instructions.

SM1-TR Specifications

  • Omni-directional 25’ pickup pattern.
  • Low noise MOSFET pre-amplifier.
  • 500Hz-13Khz Frequency response.
  • Jumper selectable hi-cut/low-cut filters limit frequency response to 900-6khz significantly reducing background noise.
  • Jumper selectable volume range:
    • “Line level” (0db) or
    • “Microphone level” (-30db)
  • Adjustable gain in both volume ranges.
  • 100 Ohm unbalanced output.
  • Internal peak limiter circuit (.5 sec response)
  • 3 position Euro-style connector makes cable termination fast and clean.
  • Reverse polarity protected
  • Power: 12 to 24VDC @ 10mA.
  • On-board voltage regulator and RFI filtering.
  • S/N ratio: more than 60DB
  • Sensitivity –45DB
  • Industrial temperature range –40 to 105C
  • Stainless steel plate mounts flush or on a single gang electrical box.
  • Dimensions: L 4.5” W 2.7” H 1.1”
  • Weight .07lbs
Reviews (0)


There are no reviews yet.

Be the first to review “SM5-TR Kit”

Your email address will not be published. Required fields are marked *